Program Table - Medion MD 30325 Manual Del Usuario

PROGRAM TABLE

The channel table displays the currently stored channels. The channels are displayed under their
channel names, insofar as the TV channel supports this function. The channel number S- or C- if
the name cannot be displayed. Here " S " stands for special channel and " C " for normal channel
("Channel").
The channel memory can store 100 channels. Activate the cursor in the table with the directional
key . You can open another column by going to the right column with the directional key
pressing again.
Menu point
Naam Now you can change the channel name.
Highlight the required channel name and press the red key. You can now
change the first letter. Select a symbol with the directional keys
symbols are displayed in the following sequence: A B C [t/m] Z a b c [t/
m] z ( ) * + , . / [space] - _ 0 1 2 [t/m] 9 .
Use the directional key
press the red key again to store the name.
Select the channel you wish to remove from the list and then press the
Delete
yellow key.
Press the yellow key again to confirm. The channels underneath will shift up
one place in the table.
Insert With this you can shift a channel to another location.
Select the required channel and press the green key. Move the channel to
the required location with
channels will move as well.
APS You can search for channels automatically with APS.
Press the blue key. A text will appear: " WARNING! All Prestored
Programs will be deleted " . Select another country if necessary
with the directional keys
sequence in which channels are stored.
Press the blue key if you want to cancel the function. Press the red key or
OK to start searching. The channel table will be displayed after the search
is finished.
Settings
to go to the next letter, and so on. At the end
and press the green key again. The other
The country setting has an effect on the
EN
and
. – The
25