Activating And Modifying The Pap Function - Medion MD 30325 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Activating and modifying the PAP function

1.
Connect a device (e.g. a DVD player) to one of the digital inputs (HDMI 1, HDMI 2, YPbPr or
PC).
2.
If the LCD-TV does not itself display the picture from the external device, select the source with
the AV/SOURCE key or in the SOURCE menu (see page 26). The picture from the external
device is now the main picture.
3.
Press the
key. The PAP window with the TV programme (aerial signal) will now appear to
the right of the main picture.
• You can select another channel for the TV picture in the PAP window with the channel select keys.
• You can select another source (a device that is connected to one of the analog inputs) for the
PAP window with the AV/SOURCE key.
• You can switch the sound reproduction between the main window (connected device) and the
PAP window (TV) with the directional select keys
• You can swap the PIP window and the main picture with the P>P/SWAP key.
• You can close the PAP window by pressing
The PAP menu
You can enter various settings for the PAP window.
• While the PAP window is displayed, press on the menu key M and open the FEATURE menu
(see also "Navigating within the Menu", page 18).
• Open the PAP menu with the directional key
Menu point
Switching the PAP function on or off.
PAP ON-OFF
PAP Picture
Open the PAP Picture sub-menu with the directional key
correspond with those on the PICTURE menu, see page 19.
Select the source for the PAP picture. If the main picture comes from an
PAP Source
analog source, then you can select from the digital and analog sources
here. If the main picture comes from a digital source, then you can only
select an analog source for the PAP picture.
PAP-zenders
Select the programme with the directional keys
PAP SWAP
With this you can swap the PAP picture and the main picture.
.
again.
.
Settings
. The settings
or the digit keys.
17
EN

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido