Overview; Lcd-Tv; Operating Controls On The Side - Medion MD 30325 Manual Del Usuario

O
VERVIEW

LCD-TV

Front
1. TFT screen
2. On/off light: the blue light will come on when the device is in stand-by mode. It will go off if
the device is switched on.
3. Loudspeakers
4. Infra-red sensor: receiving area for infra-red signals from the remote control.

Operating controls on the side

1. STANDBY: to switch the LCD-TV off temporarily.
2. TV/AV : to select the input signal: TV (antennea, EXT–1 , EXT–2 , EXT–1 S , BAV , S-
Video , HDMI 1 , HDMI 2 , YPbPr , PC .
MENU: with this key you can display the screen menu to make adjustments to your
3.
equipment.
+ P/CH – : you can switch TV channel using these keys.
4.
5. : you can regulate the volume of your equipment with these keys.
Rear
1. Headphone connection: to connect headphones with a 3.5 mm TRS stereo connector.
2. VIDEO-input (yellow) and AUDIO-inputs (red/white): to connect a device using an RCA
cable.
3. S-VHS input: to connect a device using an S-VHS cable.
VGA-INPUT: to connect a PC.
4.
PC AUDIO IN: audio in for 3.5 mm TRS stereo connector, e.g. for PCs.
5.
TUNER: to connect the aerial.
6.
Y - PB - PR - L - R: Component inputs to connect devices with Component output.
7.
8. SCART 1: 1st SCART connecting
9. SCART 2: 2nd SCART connection
10. SRV : only for servicing purposes. Do not try to connect a cable to this.
11. Power in: to connect the supplied power cable.
12. On/off switch: to put the device into stand-by mode and switch it off again.
13. HDMI 1 input: to connect a device with an HDMI output.
14. HDMI 2 input: to connect a device with an HDMI output.
EN
3