Activating And Modifying The Pip Function - Medion MD 30325 Manual Del Usuario

Activating and modifying the PIP function

1. Connect a device (e.g. a DVD player) to one of the digital inputs (HDMI 1, HDMI 2, YPbPr or
PC).
2. If the LCD-TV does not itself display the picture from the external device, select the source with
the AV/SOURCE key or in the SOURCE menu (see page 26). The picture from the external
device is now the main picture.
3. Press the key. The PIP window (small picture) will now appear with the TV programme
(aerial signal) within the main picture.
• You can select another channel for the TV picture in the PIP window with the channel select keys.
• You can select another source for the PIP window with the AV/SOURCE key (a device that is
connected to one of the analog inputs).
• You can switch the sound reproduction between the main window (connected device) and the
PIP window with the directional keys
• You can swap the PIP window and the main picture with the P>P/SWAP key.
• You can close the PIP window by pressing
The PIP menu
You can enter various settings for the PIP window.
• While the PIP window is displayed, press on the menu key M and open the FEATURE menu (see
also "Navigating within the Menu", page 18).
• Open the PIP menu with the directional key
Menu point
PIP ON-OFF
PIP Picture
PIP Position
PIP Source
PIP-zenders
PIP Swap
16
Switching the PIP function on or off.
Open the PIP Picture sub-menu with the directional key
correspond with those on the PICTURE menu, see page 19.
Select a position within the main picture with the
Select the source for the PIP picture. If the main picture comes from an
analog source, then you can select from the digital and analog sources
here. If the main picture comes from a digital source, then you can only
select an analog source for the PIP picture.
Select the programme with the directional keys
With this you can swap the PIP picture and the main picture.
.
again.
.
Settings
. The settings
key.
or the digit keys.