Connections; Signal And Control Inputs; Supply Voltage And Outputs; Version With Relays - Kübler CODIX 923 Manual De Instrucciones

9

Connections

9.1

Signal and Control Inputs

N° Designation
1 AC: 24 VDC/80 mA
DC: U connected
B
through
2 GND (0 VDC)
3 INP A
4 INP B
5 RESET
6 LOCK
7 GATE
8 MPI
9.2

Supply voltage and Outputs

9.2.1 Version with relays

N° Designation
9 n.c.
10 n.c.
11 Relay contact C
12 Relay contact N.O.
13 Relay contact N.C.
14 AC: 90..260 VAC N~
DC: 10..30 VDC
15 AC: 90..260 VAC L~
DC: GND (0 VDC)
www.kuebler.com
Function
Sensor supply
voltage
Common connection
Signal and Control
inputs
Signal input A
Signal input B
Reset input
Keypad lock
Gate input
User input
Function
-
Output
Supply voltage
Supply voltage

10 Technical Data

10.1

General Data

Display LCD positive or negative,
backlit
2 x 6-digit
Digit height upper line
lower line
special characters
Overload/ Blinking, 1 s
Underload Counter loses no pulses up to
1 decade
Data retention > 10 years, EEPROM
Operation 8 keys
10.2

Pulse counter

Count frequency max. 55 kHz (see section 13.
frequencies typ.)
Response time of the output:
Add/Sub
With automatic repeat
A/B ; (A-B)/A
10.3

Tacho/Frequency meter

Frequency range 0,01 Hz to 65 kHz (see
section 13. frequencies typ.)
Measuring 76.3 Hz Time interval
principle (period measurement)
> 76.3 Hz Gate time
Gate time approx.13.1 ms
Measuring error < 0.1% per channel
Response time of the output:
1-channel operation < 100 ms @ 40 kHz
< 350 ms @ 65 kHz
2-channel operation < 150 ms @ 40 kHz
< 600 ms @ 65 kHz
10.4

Timer

Seconds
Minutes
Hours
h.min.s
Min. time measurable
Measuring error
Response time of the output:
10.5 Signal and Control inputs
Polarity: programmable NPN/PNP
for all inputs in common
Input resistance 5 k
Pulse shape any
9 mm
7 mm
2 mm
< 13 ms
< 13 ms
< 34 ms
0.001 s ... 999 999 s
0.001 min ... 999 999 min
0.001 h .. 999 999 h
00h.00min.01s ...
99h.59min.59s
500µs
< 100 ppm
< 13 ms
Page 15