Mcs Use (Optional) - Dalla Corte EVO2 Manual De Usuario

MCS use (optional)

The MCS is an automatic milk steaming system.
Thanks to the MCS, milk is heated at a pre-set tem-
perature and the foam obtained can be compared
to the foam produced by the best baristas.
To use the MCS, it is sufficient to pour cold milk
into a pitcher. Place the MCS wand into the milk
and push the P9 (Pic. 3) button.
NOTE
For a proper functioning of the MCS, the steam wand and its terminal have to be cleaned properly
after use. It is also recommended to remove the terminal from the steam wand, clean it and
reassemble it at least twice a day (depending on frequency of use of the MCS).
To obtain a good milk foam, fill the pitcher with a quantity of milk which covers at least the steam
wand terminal and place the wand in the pitcher in a lateral position to help creating a vortex
during milk heating.
46
As soon as the milk reaches the pre-set tempera-
ture (set during machine installation), the MCS will
stop automatically and milk will be ready for use.
WARNING
Do not use the MCS if the wand is oriented towards
you or another person.