Service And Repair; Avoid Damaging The Oven Or Other Dangerous Situations By Following These Instructions - Kuppersbusch ML6330.0 Instrucciones De Uso E Instalación


WARNING: Ensure that the appliance is switched off before
replacing the lamp to avoid the possibility of electric shock.
Please refer to the chapter "CHANGING THE OVEN LIGHT
BULB".

Service and Repair


WARNING! Cut the power supply before repair.

WARNING! Only a competent person can carry out any
service or repair operation that involves the removal of a cover
which gives protection against exposure to microwave
energy.

WARNING! If the door or door seals are damaged, the
appliance must not be operated until it has been repaired by a
competent person.

If the power cable is damaged it should be substituted by the
manufacturer, authorized agents or technicians qualified for
this task in order to avoid dangerous situations.

Repair and maintenance work, especially of current carrying
parts, can only be carried out by technicians authorized by
the manufacturer.
Avoid damaging the oven or other dangerous situations by
following these instructions

Never switch on the microwave when it is empty. If there is no
food inside there may be an electrical overcharge and the
oven could be damaged. RISK OF DAMAGE!

For carrying out oven programming tests put a glass of water
inside the oven. The water will absorb the microwaves and
the oven will not be damaged.

Do not cover or obstruct the ventilation openings.
english
7