Basic Settings; Secundary Menu; Setting The Clock; Hiding/Displaying The Clock - Kuppersbusch ML6330.0 Instrucciones De Uso E Instalación

1
Opening the door
To open the door, press the rotating knob (3)
for 2 seconds.
Secondary Menu
On the secondary menu you can access the
clock (to set the time or to hide/display it),
the

timer,

the
showroom mode.

Setting the clock

After your microwave oven is first plugged in or
after a power failure, the clock display will flash
to indicate that the time shown is not correct.
To set the clock, proceed as follows:
1. Press the function knob (1) for 3 seconds.
2. Turn the rotating knob (3) to navigate
through the secondary menu options. The
desired option lights up.
3. Press the rotating knob (3) once, when you
see the clock symbol
4. Turn the function knob (1) to set the
correct hour value.
12
safety block and
.
2
5. Turn the rotating knob (3) to set the correct
minute value.
6. To finish, press the rotating knob (3) to
confirm.

Hiding/Displaying the Clock

If the clock display disturbs you, you can hide
the
it proceding as follows:
1. Press the function knob (1) for 3 seconds.
2. Turn the rotating knob (3) to navigate
through the secondary menu options. The
desired option lights up.
3. Press the rotating knob (3) once, when you
see the clock symbol
2. Press the rotating knob (3) for 2 seconds.
3. If you want to see the clock display again,
repeat the same procedure.
Timer
To set the timer, proceed as follows:
1. Press the function knob (1) for 3 seconds.
2. Turn the rotating knob (3) to navigate
through the secondary menu options. The
desired option lights up.
3. Press the rotating knob (3) once, when you
see the timer symbol
3
.
.