Thermador PROFESSIONAL PRO GRAND PRG364JDG Manual De Instalación página 18

The appliance and its individual shut off valve must be
disconnected from the gas supply piping system during any
pressure testing of the system at test pressures in excess
of 1/2 psig (3.5kPa.).
When checking the manifold gas pressure, the inlet
pressure to the regulator should be at least 6.0" W.C. (14.9
mb) for natural gas or 11.0" W.C. (27.4 mb) for propane. Do
not attempt any adjustment of the pressure regulator.
The appliance must be isolated from the gas supply
piping system by closing its individual manual shut-off
valve during any pressure testing of the gas supply
piping system at test pressures equal to or less than 1/2
psig (3.5kPa.).
CAUTION:
Installer is responsible for ensuring that the installation, gas
connections, and grounding comply with all applicable
codes.
Do not remove the back cover of the range. It is for an
authorized servicer access only.
CAUTION:
Figure 13: Gas Supply Connection
English 15