Assembly Instructions; Tools Required; Pump Assembly - Campbell Hausfeld PS460G Manual De Uso

Operating Instructions and Assembly Instructions
Airless Paint Sprayers

Assembly Instructions

TOOLS rEqUIrED:

3/4 in. or Adjustable Wrench
u
5/8 in. or Adjustable Wrench
u
ASSEMbLy
1. Slide the handle assembly into the
slots provided on the frame. Use the
supplied nuts and bolts to secure the
handle to the frame.
2. Attach high pressure hose to pump
and spray gun using a 3/4 inch
wrench (See Figure Below). DO NOT
attach suction assembly at this time.
TWO GUN ASSEMbLy
NOTE: Second gun and hose not
included.
Replace plug with second hose adapter
(included with sprayer). Copper seal
washer must remain in place.

Pump Assembly

Suction
Assembly
Outlet
Prime
Button
Housing
7
Inlet
Valve
Hose
Adapter
Outlet
Valve
Prime/
Spray
Valve
Pressure
Valve
Suction
Bell
Assembly
P R
lug emoval
By-pass
Hose
www.chpower.com