Cisco Linksys WRT160NL Guia Del Usuario página 39

Appendix B
4. From the Drive drop-down menu, select an available
drive letter.
Select Drive Letter
Finish.
5. Click
Access Mapped Drive
1. On your desktop, double-click the
Computer Icon
NOTE:
If the Computer icon is not
displayed, then go to Start > All Programs >
Accessories > Windows Explorer.
2. Double-click the mapped drive to access it.
Double-Click Mapped Drive
Wireless-N Broadband Router with Storage Link
Computer icon.
How to Install and Access USB Storage
Windows XP
Map a Drive
1. On your desktop, double-click the
My Computer Icon
NOTE:
If the My Computer icon is not
displayed, then go to Start > All Programs >
Accessories > Windows Explorer.
2. In the Address field, enter the server name of the
Router:
\\<server_name_of_Router>
Enter Server Name of Router
The default server name of the Router is
WRT160NL. You can change this name on the
Storage > Administration screen; refer to Storage >
Administration, page 20.
NOTE:
Another option is to use the IP address
of the Router. In the Address field, enter the local
IP address of the Router:
\\xxx.xxx.xxx.xxx
The default setting is 192.168.1.1. You can
change this IP address on the Setup > Basic Setup
screen; refer to Setup > Basic Setup, page 4.
3. A login screen may appear. If prompted, enter your
account username and password. (For the admin
account, admin is both the default username and
password.)
Enter Account Username and Password
User accounts are set up on the Storage > Administration
screen; for more information, refer to Create a User
Account, page 38.
My Computer icon.
35