Cisco Linksys WRT160NL Guia Del Usuario página 41

Appendix B
Create a Shared Folder
Storage tab.
1. Click the
Disk tab.
2. Click the
Storage > Disk
3. To create a shared folder, click
Shared Folder
4. In the Display Name field, create a name for the shared
folder.
5. If the shared folder should include the entire partition,
select Share entire Partition and proceed to step 7.
If you do not want to share the entire partition, then
specify the folder you do want to share.
Wireless-N Broadband Router with Storage Link
Create Share.
How to Install and Access USB Storage
6. Select the appropriate folder. To display sub-folders,
click Enter into Folder. To return to the previous
folder, click Return to Upper Folder.
7. To allow a group access to the shared folder, select it
from the Available Groups column and then click the
>> button.
NOTE:
Specify which user groups have read-
and-write or read-only access to the shared
folders.
8. To block a group from accessing the shared folder,
select it from the Groups with Access column and then
click the << button.
Save Settings to apply your changes or click
9. Click
Cancel Changes to clear your changes. Click Close to
exit the screen and return to the Disk screen.
Create a User Group Account
1. Click the Storage tab.
2. Click the Administration tab.
Storage > Administration
Group Management section, click Create New
3. In the
Group.
Group Account
37