Axonics 2501 Manual Del Instrucciones página 25

Ocultar thumbs Ver también para 2501:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 204
Controlling Stimulation Amplitude
2
3
1
8
3
7
2
5
4
6
7
5 The gray box between the up and down arrows represents
the programmable range of stimulation amplitude,
which is 0 to 12.5mA. At high electrode impedances, the
delivered stimulation amplitude may be lower than the
programmed amplitude.
6 When stimulation is on, the area under the slider bar will
turn dark gray with horizontal blue bars.
7 Stimulation may be set to increase amplitude
automatically if "Auto" is selected.
Stimulation amplitude can be adjusted in two modes: manual
or automatic .
Manual Amplitude Adjustment
Manual amplitude adjustment is the default mode and is
active when "Manual" ( 7 ) is seen . In the manual amplitude
adjustment mode, stimulation amplitude is changed by
moving the slider bar ( 4 ) or by pressing the up and down
arrows ( 3 ) . Stimulation is turned on by pressing the
stimulation button ( 8 ), which lights up when stimulation
is on . When stimulation is on, the amplitude can only be
adjusted using the top and down arrows . Stimulation is turned
off by pressing the stimulation button ( 8 ) again .
Note: For test stimulation during lead placement and Stimulator
programming, the stimulation amplitude will start at the programmed level
and will not ramp from zero .
21 21

Publicidad

Tabla de contenido

Solución de problemas

loading

Productos relacionados para Axonics 2501

Tabla de contenido