Axonics 2501 Manual Del Instrucciones página 39

Connecting to a Stimulator
To connect to one of the "Additional Devices", press the device
2
name to select a device . Press "Connect" when it appears to
the right of the Patient ID ( 1 ) to connect to the device . The CP
will display a prompt with a progress indicator as it connects to
the patient device . The CP will automatically open the Patient
1 Device screen when connected to the selected device .
Note: The list of available devices can be updated by pressing the "Scan
Again" button ( 2 ) . Move closer to the targeted device to increase the
likelihood that the CP finds the device .
35