Resetting The Stimulator - Axonics 2501 Manual Del Instrucciones

Resetting the Stimulator

The Stimulator can be reset if there is a need to not deliver
stimulation for a period of time (e .g ., days or longer) or if it was
configured with the wrong trial type . Resetting the EPG puts the
Stimulator in a power- conserving state to preserve the battery
of the Stimulator and erases all data from the Stimulator .
How to reset the Stimulator: Press the "Reset" button ( 1 ) .
A prompt will ask for confirmation before resetting the
Stimulator . The Stimulator will automatically disconnect from
the CP and the CP will return to the Home screen when the
Stimulator is reset .
1
Note: The CP and patient Remote Control will not be able to communicate
with the Stimulator until the Stimulator is activated by pressing the button on
the back of the Stimulator .
How to wake up the Stimulator: Press the button on the back
of the Stimulator . The green light will flash next to the button .
Connect with the CP within 90 seconds or the Stimulator will
turn off .
47