Parameter Setting - Lenze L-force E84DGDVB 4 Serie Instrucciones Para El Montaje

7

Parameter setting

By means of the parameterisation process you can provide the inverter with
optimum settings meeting various requirements for different applications.
The parameterisation can be performed in the following ways:
Parameterisation with L−force »Engineer«
Comprehensive settings made online by the use of software
ƒ
–
Safe parameter setting is supported by the »Engineer« Lenze PC
software, starting from version 02.23.
–
The parameterisation process is described in the software manual for
the SM302 safety module.
–
Requires software and a USB diagnostic adapter.
Parameter setting using a diagnosis terminal/keypad
Setting of specific parameters by experienced users
ƒ
–
Requires a diagnosis terminal that is suitable for 8400 motec
–
The parameter setting procedure is described in the EZAEBK000X
operating instructions for the 400 keypad.
)
Note!
Save parameter settings safe against mains failure
In order to prevent parameter settings carried out in the device from
being lost by mains switching, you have to explicitly save the
parameter set with mains failure protection in the device.
EDK84DGDVBxxx4 DE/EN/FR/ES/IT 8.3
Parameter setting
l
7
103