Lenze L-force E84DGDVB 4 Serie Instrucciones Para El Montaje página 89

Control modes
Control modes
DIP2/5−7 DIP2/5−7
40
(MCI)
Settings with P2
(Lenze setting bold)
Use P2 to write different preset setpoints to C00039/1 and C00039/2.
P2
Description
Write preset setpoint 1 to C00039/1
Write preset setpoint 2 to C00039/2
Settings with P3
(Lenze setting bold)
Use P3 to write different acceleration/deceleration times to C00012/C00013
including different deceleration times for quick stop to C00105.
P3
Description
Write acceleration/deceleration time to
C00012/C00013
Write deceleration time for quick stop to
C00105
Settings with P1
(Lenze setting bold)
Use P1 to write a preset speed setpoint to C00039/3. Depending on the switch
position of DIP1/7, C00039/3 is written to once or permanently at mains
connection.
Remove cap in order to be able to set the P1 potentiometer.
Screw cap on again after the setting process, in order to ensure the
ƒ
degree of protection of the inverter.
P1
Description
Write preset setpoint 3 to C00039/3
EDK84DGDVBxxx4 DE/EN/FR/ES/IT 8.3
DIP switch / potentiometer assignment 1
Description
Description
W W
(DIx (DIx High) High)
The technology application is controlled via fieldbus communication.
Depending on the Communication Unit available
l
Settings
Setting
0 1 2 3 4
[%] 5 10 15 20 25 30 35 40 45
[%] 10 20 30 40 50 60 70 80 90
Setting
0 1 2 3
[s] 0.1 0.5 0. 1
7
[s] 0.1 0.2 0. 0.
5 7
0
[%] 0
5
5 6 7 8 9
50
100
4 5 6 7 8 9
1. 2 5 10 30 60
5
1 1. 2 5 10 30
5
Setting
... 9
... 100
89