Astralpool OPTIMA PRO NEXT Manual De Instalación página 12

•
•
•
•
Paragraph 7 – Proportional to External Impulses (ppm dosage)
Programming
+
PROG
Config.
Config.
Funct.
Funct.
PPM
ppm
10.0
L/pulses
L/pulses
pulses/L
Conc. (%)
100.0
Memory
Off
PPM
•
Alarms and statuses
Lev = Level Alarm
•
Flw = Flow Alarm
•
•
EM00136320
Display during operation
Function mode
Batch
Alarms and statuses
Lev = Level Alarm
Flw = Flow Alarm
•
•
•
•
The pump doses proportionally to an external signal (ex: water meter
pulse-sender) by automatically calculating the ratio between the input
The data to be inserted are the ppm value, the pulses/liter ratio (or
liter/pulse) of the counter and the concentration of the product to be
dosed.
The dosage frequency can be modified during operation by pressing
1000.0
1000.0
Display during operation
Function mode
empty = pump in stating
•
Stop = pump in stop
•
Paus = pump in pause
•
•
(1:c)
P 100%
Pump status
•
empty = pump in stating
Stop = pump in stop
•
Paus = pump in pause
signals and the pump strokes according to the programmed ppm
+ simultaneously.
ppm
P 100%
Pump status
rev.2.0 EN
Value of dosing on going
(depends on unit of measure
selected)
Percentage, Frequency,
l/h, Gph, ml/m
Operation
value.
Value of dosing on going
(depends on unit of measure
selected)
Percentage, Frequency,
•
l/h, Gph, ml/m
•
10