Astralpool OPTIMA PRO NEXT Manual De Instalación página 6

Control panel – OPTIMA PRO NEXT
To access the programming menu. (Press and hold down simultaneously for at least 3 seconds).
+
To start and stop the pump.
To disable the display notification in case of active level alarm condition (only alarm function), flow
alarm condition and memory.
In programming mode it functions as "enter", to confirm the access and the changes within the
various menu levels.
To "escape" the various menu levels. Before exiting the programming mode you will be prompted to
save the changes.
Prolonged pressure displays the screen for the flow sensor calibration.
+ to change the contrast.
To scroll the menus or change the parameters in programming mode.
In Batch, Timer mode, simulating the external trigger can start the dosage.
Prolonged pressure enables the priming.
Green LED flashes while dosing.
Red LED turns on in case of various alarm conditions.
EM00136320 rev.2.0 EN 4