Astralpool OPTIMA PRO NEXT Manual De Instalación página 15

Paragraph 9 – Weekly timed dosage
PROG
Config.
Config.
Funct.
Funct.
Weekly
Weekly
Clock
You can program 10 dosages for the entire week. Press
in order to program the dosages.
1) Number of program: press
2) Dosage schedule: press
3) Quantity to be dosed: press
4) Dosing time, i.e. the period of time (in seconds) in which the quantity previously programmed will be dosed:
press to set the value in seconds and then press
5) Setting the dosage relay: press
relay does not stay off (open); in "after" mode, the relay is closing when the dosage is activated and stays closed,
when the dosage is finished, for a period of time (in seconds) that you can set by pressing the
confirm by pressing the
period of time (in seconds) that you can set by pressing the
6) Activation days, i.e. the days in which you want the set program to be active (start time, quantity, dosage time
and relay operation mode). Press
then press to change the day of the week. Press
If you need to configure the new program, repeat the above procedure, otherwise press
menu.
On the main menu the next step is to set the clock; press
values and then press
day and the time set are those to which the programming will refer.
EM00136320
+
Weekly
PROG01
Mon
00:00
to modify and then press
to modify and then press
to set the value in "mL" and then press
to modify the values and then press
key. In "before" mode, the relay is closing before the dosage activation time, for a
to modify the option, then press
to confirm. In sequence, you can set the day, the hour and the minute. Of course, the
Weekly
Time
PROG01 00.00
Q.ty
0
Dos.Time
0
MTWTFSS
_______
from "Weekly Dos." to enter the programming mode
to confirm.
to confirm.
to confirm.
key and then confirm by pressing the
to confirm and automatically pass to the next program.
to modify the option, then press
rev.2.0 EN
ml
s
to confirm.
to confirm; in "Off" mode the
to activate/deactivate the dosage,
to return to the main
key and then
key.
to set the
13