Astralpool OPTIMA PRO NEXT Manual De Instalación página 9

Setting the language
Programming
+
PROG
Config.
Config.
Funct.
Language
English
Paragraph 1 – Manual dosage
Programming
+
PROG
Config.
Config.
Funct.
Funct.
Manual
Paragraph 2 – Proportional Dosage to a 0/4-20 mA signal
Programming
+
PROG
Config.
Config.
Funct.
Funct.
0/4-20
Low
4.0mA
High
20.0mA
IN mA :
0.1mA
EM00136320
Allows you to set the language. By default the pump is set to English.
Press
Press
The pump works in constant mode. The flow rate can be adjusted manually
by pressing
Display during operation
–––
Function mode
Man = Manual
•
Alarms and statuses
Lev = Level Alarm
•
Flw = Flow Alarm
•
•
•
•
The pump proportionally doses at a signal of (0)4-20 mA. By default, the
pump interrupts the dosage at 4 mA and doses at the maximum set
frequency when it receives 20 mA. These two values can be modified
during programming. The maximum frequency can be modified during
operation by pressing
To view the current reading for the mA input, scroll the menu items to In
mA.
For an input signal of less than 0.2 mA the alarm LED turns on to indicate
the absence of signal.
to access the item, and then press
to confirm and return to the main menu.
+ simultaneously.
MAN
P 100%
Value of dosing on going
(depends on unit of measure
Pump status
empty = pump in stating
•
Stop = pump in stop
Paus = pump in pause
+
rev.2.0 EN
Operation
to set the language.
Operation
selected)
Percentage, Frequency,
l/h, Gph, ml/m
Operation
simultaneously to modify the flow rate.
7