The hood (m)
· The hood can be unfolded by moving it upwards.
· Push and hold the buttons on the sides of the hood. The hood can now
be folded downwards.
Assemble the rain cover on the pram body (n)
· Make sure that the hood of the pram body has been unfolded.
· Place the rain cover from top to bottom over the pram body and make
sure that the rain cover attaches well all around the bottom of the pram
body.
· Close the Velcro strips around both sides of the frame.
· Open the zipper in order to remove your baby from the pram body
when using the rain cover.
The seat
· The seat unit is suitable for children from birth up to 55 lbs. (25 kg).
! If your child is younger than 6 months always use the pram body or the
fully reclined position of the seat.
· When in the drive position, the seat can be folded and unfolded with
the frame and does not therefore need to be removed from the frame.
· The back support and leg support are adjustable.
· Make sure that the frame has been fully unfolded and the brake is
blocked during all actions indicated below.
Moving the seat unit to face forwards (o)
· Place the attachable elements on the seat into the attachment points
on the frame and press the seat downwards until you hear a click on
both sides. NB! Place both ridges on the attachment elements into
the frame attachment points at the same time.
· Check that the chair has been attached solidly by trying to lift it from
the frame.
Moving the seat unit to face backwards (p)
· In order to place the seat unit so that it is facing backwards, the attach-
ment elements on the seat need to be turned by 90 degrees. Press the
button (p1), the attachment elements will unlock and spring out. Turn
the attachment elements to the correct setting and then click into
place.
· Then place the attachable elements on the seat into the attachment
points on the frame and press the seat downwards until you hear a click
on both sides. NB! Place both ridges on the attachment elements into
the frame attachment points at the same time.
EN
9