The Wheels - Mutsy IGO Serie Manual De Instrucciones

the lower support clicks into place (a2) and move the push bar back-
wards until you hear a second click (b).
· If you unfold the frame, with the pushchair seat fitted to the frame, you
then have to manually raise the front brace afterwards.
· Before use always check that the pram has been unfolded and secured cor-
rectly.
Fold the frame (c,d)
· Stand behind the frame and put the frame on the brake. Push the
height adjustment button (c1) of the pushbar in and move this to the
lowest setting. Pull the folding safeguard (c2) towards you on both
sides and turn the pushbar forwards until the pushbar lies on the
frame (c3).
· Pinch the frame unlocking buttons and fold the frame (d).
· The folding safeguard locks automatically when the product is folded up.
· The integrated carry handle, which is located under the rear axle, has
made lifting and carrying the folded pushchair more practical.

The wheels

Assemble the rear wheels (e)
· Slide the axle of the rear wheel in the rear wheel casing until you hear a
click. Pull the wheel to check that it has been attached firmly.
Disassemble the rear wheels (f)
· Press the button on the inside of the rear wheel casing and take the
wheel off the frame
Assemble the front wheels (g)
· Slide the axle of the front wheel upwards in the front wheel casing
until you hear a click. Pull the wheel to check that it has been attached
firmly.
Disassemble the front wheels (g)
· Push the button on the front side of the front wheel and pull the wheel
from the front wheel casing.
The swivelling wheels (h)
· Turn the ring above the front wheel inwards on both sides in order to
block the swivel setting. The swivelling wheels will automatically be
locked when the wheels are placed in the rear direction.
· Turn the ring above the front wheel on both sides outwards to unlock
the swivelling wheels.
EN
7