Care, Maintenance & Cleaning - HoMedics HEALTH PLUS BPW-040-HP Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CARE, MAINTENANCE & CLEANING
• Clean the blood pressure monitor body
and cuff carefully with a slightly damp, soft
cloth. Do not press. Do not wash cuff or use
chemical cleaner on it. Never use thinner,
alcohol or petrol (gasoline) as a cleaner.
• Leaky batteries can damage the unit. Remove
the batteries when the unit will not be used for
a long time.
• Follow local ordinances and recycling
instructions regarding disposal or recycling of
the device and device components, including
batteries.
• If the unit is stored near freezing, allow it to
acclimate to room temperature before use.
• This blood pressure monitor is not field
serviceable. You should not use any tool to
open the device nor should you attempt to
adjust anything inside the device. If you have
any problems with this device, please contact
HoMedics Consumer Relations (contact
information on warranty page).
• Do not immerse the unit in water as this will
result in damage to the unit.
• Do not subject the monitor or cuff to extreme
temperatures, humidity, moisture, or direct
sunlight. Protect from dust.
• Do not fold the cuff tightly.
23
• Do not disassemble the monitor or cuff. If in
need of repair, refer to the warranty section of
this manual.
• Do not subject the monitor to extreme shocks
(do not drop on floor).
• Do not inflate the cuff unless wrapped around
wrist.
• Do not wrap the cuff around body parts other
than your wrist.
• Do not drop or insert any object into any
opening.
• This monitor may not meet its performance
specifications if stored or used outside of
these temperature and humidity ranges:
• Storage/Transportation
Environment
Temperature:
-13°F~158°F
(-25°C~70°C)
Humidity:
Less than 93% RH
• Operation
Environment
Temperature:
41°F~104°F
(5°C ~40°C)
Humidity:
15 ~ 93% RH
24

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido