Installing Batteries - HoMedics HEALTH PLUS BPW-040-HP Manual De Instrucciones

INSTALLING BATTERIES

1. The battery cover is
located along the side
of the monitor. Remove
battery cover by pressing
down and pulling away
from the monitor.
2. Install batteries according
to the polarity indications
inside the compartment
(as shown in figure 2).
Battery Type: 2 Alkaline
LR03 "AAA" size
3. Replace the cover by
inserting it back into place.
1.
2.
3.
11
Replace the batteries if:
• The weak battery symbol appears on
the display.
• Nothing appears on the display when the
power is switched on.
Replace all batteries at one time (as simultaneous
set). Use only 1.5V "AAA" alkaline batteries.
Remove batteries when the unit is not in use
for extended periods of time. Date and time
will need to be reset if batteries are removed or
replaced. Clean contacts on battery and in battery
compartment with a soft dry cloth each time you
install batteries.
Note:
Batteries are hazardous waste. Do not dispose
of them together with the household garbage.
12