Timex M850 Manual De Instrucciones página 9

For Time of Day, you can set the following values:
• Hour
• Minute
• Seconds
• Year
• Month
Switching time zones
The Watch can track two time zones (T1 and T2). Look at the
second zone by pressing
START/SPLIT.
using these steps:
1. Press and hold START/SPLIT until HOLD FOR TIME 2 appears.
2. Continue to hold until the time switches and the Watch beeps.
3. Repeat steps 1 and 2 to switch back to T1. The message will read
HOLD FOR TIME 1.
Note that you must independently set the time of day for
each time zone.
Time of Day Mode tips & tricks
You can return to Time of Day Mode from any other mode on the
®
Watch by pressing and holding
day displays.
16
•Date (automatically
sets the day of week
when you set the
date)
• Hour format
(i.e., AM/PM
versus 24-hours)
Or, switch from T1 to T2
until the time of
MODE
The Watch does not automatically adjust for Daylight Savings
®
Time. When switching between Standard Time and Daylight
Savings Time, you must manually adjust the hour value.
When you use the HR Sensor with the Watch, you can view your
®
current heart rate on the bottom line of the Watch display. You
may elect to continue viewing the day of the week instead by
pressing until the day of the week becomes visible.
DISPLAY
If the Watch does not detect the HR Sensor, the day of the week
®
will appear on the bottom line of the display.
You can only reset the seconds value to zero.
®
Time of Day Mode example
Assume that you live in San Francisco and work with a client in
Singapore. Like all busy people, it is imperative you keep track of
time, so you set T1 to your local time. But it is also important to
have a quick reminder of your client's time, so you set T2 to
Singapore time. With both time zones available, you can quickly
check your client's time or even switch your monitor to display T2
when you travel to Singapore.
17