17.3
Creating a backup file (example)
Destination
To create a backup of an individual module:
R
The module's IP address is 192.168.3.15.
R
Only today's data is required.
Prerequisites
R
Virtual machine installed with the backup tool.
R
Virtual machine located in the same network as
module
R
Ping test to the IP address 192.168.3.15 shows no
error.
Version
1. In Windows Explorer, navigate to the folder where
the backup tool set is located.
Fig. 45:
Path to batch file
2. Double-click 'TTM_BACKUP_LAST_DAY_ENTER_IP.BAT'
to open it.
A console window opens.
3. Enter the IP address of the module to be backed up.
Fig. 46:
Prompt to enter IP address
Messages that show the actions and progress of
the backup appear.
Fig. 47:
Progress of the backup
Robert Bosch GmbH
Backup tool | TTM 2104/2204 | 51
i
Completing the backup may take some time,
depending on the number of days being backed up.
Fig. 48:
Program messages
i
Do not stop the process. If an error occurs, an error
report is displayed.
Fig. 49:
Backup successful
"
Following successful backup, the file path and file
name are displayed in the window.
Fig. 50:
Backup failed
"
A failure indication is displayed after an error occurs
during the backup. Create a screenshot and submit it.
en
en
|
1 691 206 007
2017-06-19