Device Information - Bosch TTM 2104 Instrucciones De Servicio

i
Check the displayed broadcast address! It should
match the network of the TTM 2104/2204 modules.
i
If a VPN or a virtual machine is being used, the
broadcast address that is displayed automatically
may differ from that needed for the TTM 2104/2204
network and must be changed manually. The last
number must always be "255".
2. To start the search, select Search.
"
The search stops automatically if two modules are
found or the end of the address range is reached.
16.2.2 Network statistics
i
The Network Statistics table shows information on
the data traffic in the network.
i
Selecting Save Network Statistics.... saves the data
as a file.
16.3

Device information

i
The menu item Device Information displays
information on the hardware and the software
version installed.
i
Selecting Save.... saves the data as a file.
Fig. 43: Device information
Robert Bosch GmbH
Service tool | TTM 2104/2204 | 49
16.4 Service
i
All maintenance performed or service calls can be
documented in the menu item Service.
1. A short description can be entered in the Remarks
field.
2. The desired module can be selected in Write to.
i
The Write button is active only if at least one
module is selected.
3. Clicking the Write button saves the data to the
selected module/modules.
Fig. 44: Entering a service date and work
en en
|
1 691 206 007 2017-06-19