Setting The Timer For The Auto-Off Function - melitta SOLO Manual Del Usuario

Display
• Press the On / Off button
→
All symbols in the display flash briefly for confirmation. The appliance is
ready for operation, the standby symbol
Note
Press the brewing strength button
saving standby mode. You can then directly dispense coffee.
Setting the timer for the auto­off function
Additional information on auto-off function is provided on page 52. the timer is
factory-set to level 1 (1 hour).
Prerequisite: The appliance is ready for operation, the standby symbol
is illuminated.
Adjust the timer as follows:
•
simultaneously press the button for single-cup dispensing
button for two-cup dispensing
→ the standby symbol
• Press the button for single-cup dispensing
menu for the Auto-Off function.
→ the symbol for the drip tray
Heft_Solo_EU.indd 55
Time
15 minutes
(factory setting)
30 minutes
1 hour
off
flashing
to confirm the selected time.
is flashing.
is illuminated.
is illuminated.
to wake the machine out of energy-
for more than 2 seconds.
three times to call the
and the

09.07.2009 15:47:37