Battery Indicator; Preparatory Operations; Operation - Dentsply Maillefer X-smart easy Manual De Instrucciones

BATTERY INDICATOR

The mark of the present remaining amount of the battery is displayed when the
handpiece is turned on.
Display
• Charging Stand charging indicator
This lamp will be green when the battery has a full charge and yellow when the
battery is charging.

3. Preparatory Operations

• Charge the battery (See "Charging the Battery" Chap. E.2).
• Press any button to turn the unit on.
• Select Torque – press the SELECT button until the torque box is highlighted with
a double-line. Use the (+) and (-) buttons to adjust to the desired torque level.
• Select Speed Control – press the SELECT button until the speed is highlighted,
using the (+) and (-) buttons to adjust to the desired speed level.

4. Operation

• If you press the FORWARD button briefly, the
motor handpiece starts. If you re-press the
FORWARD button, it stops. (Fig. 7)
• If you hold down the FORWARD button for more
than one second, the motor handpiece starts
and runs while the button is pressed. If you
release the button, it stops.
• If you press the REVERSE button, the motor handpiece operates in the reverse
direction until you release the button.
NOTE: If the increment button (+) or decrement button (-) is continuously held down, they cycle
through the selections quickly.
16
Full charge
Approximately 30-80% remains
Less than 30% remains.
Battery is drained. Charge the battery.
Reverse
Forward
Fig. 7