Connecting The Ac Plug Adapter; Recharging The Battery - Dentsply Maillefer propex pixi Manual Del Usuario

6.2

Connecting the AC plug adapter

Select the plug adapter that matches your electric power outlet.
Align and insert the plug adapter at the rounded edge and then snap it into place by
inserting the opposite end (see Pic. 1). To remove, pull the locking button (A) and pull out
the plug adapter."
6.3

Recharging the battery

propex pixi
is equipped with a rechargeable battery.
™
•
When the battery is low, a battery indicator appears on the status bar of the device.
When the battery icon is blinking, the battery requires recharging. However, it is still
functional for several treatments before the device shuts down.
Procedure for recharging the battery:
1. Disconnect the measurement cable
2. Connect the charger cable to propex
3. Connect the charger to the mains
During battery charging the battery symbol will first blink (see Pic.2), then will remain
steady when charging is completed (see Pic.3.)
Pic. 1 Plug adapters for power supply
www.enversaltan.com
pixi
•
11
™