ABB M2303 Manual De Instrucciones página 42

ABB-Welcome
Add or edit a new contact list by logic address:
USER LIST MANAGEMENT
Physical Address
Fig. 34 User list management
Edit or add a logic address. The following functions are available:
No. Functions
1 Enter the physical address and user logic address when adding a new
contact list.
- Physical address: the address of an indoor station, from 001 to 250,
which is an internal code sent through the bus and identified by all
devices within the system. (Set by using switches X100,X10,X1 of the
indoor station.)
- Logic address: the code that visitors enter when calling a resident.
Usually, the logic address is the apartment Number of a resident, which
is different from the physical address.
"OK"
2
- Click on this button to save the settings.
"Back"
3
- Click on this button to return to the start page.
|
Logic Address
1
2
OK
Back
3
— 41 —