ABB M2303 Manual De Instrucciones página 8

ABB-Welcome
No. Function
1 Handset
For incoming call, pick up handset within 30 seconds to activate the call.
Hang up handset to end the call.
2 4.3" touch screen.
3 Unlock button
Press this button to open the door at any time.
If the LED flashes slowly, this means an incoming call.
If the LED flashes rapidly, it means system is busy or the door has been
opened over the set time. (The sensor must be connected first.)
4 Surveillance button
In standby mode, press this button to survey the default outdoor station.
5 Programmable buttons 1,2,3
5A *Programmable buttons for additional functions, e.g. controlling the
switch actuator.
5B Default function of button 1 is to release the lock connected with an
outdoor station (COM-NC-NO)
6 System settings button
Enter into the system settings for various functions of the device.
*For this option, please contact your electrical installer.
|
— 7 —