ABB M2303 Manual De Instrucciones página 54

ABB-Welcome
Mounted on the wall
1. Affix the bottom of the device to the wall.
2. Latch the upper part of the device onto its bottom part . Place the upper side of the
device on the lock-in lugs and then press the bottom side onto the bottom part of
the device until it is caught by the clamp,
Mounted with flush-mounted box
1. Affix the bottom of the device to the existing flush-mounted box.
2. Latch the upper part of the device onto its bottom part. Place the upper side of the
device on the lock-in lugs and then press the bottom side onto the bottom part of
the device until it is caught by the clamp.
|
— 53 —