Operation Panel - Olivetti d-Copia 120D Manual De Instrucciones

OPERATION PANEL

Original to copy key and indicators
1
Exposure mode selector key and
2
indicators
Use to sequentially select the exposure
modes: AUTO, MANUAL or PHOTO.
Selected mode is shown by a lit
indicator. (p.50)
Light and dark keys and exposure
3
indicators
Use to adjust the MANUAL or PHOTO
exposure level. Selected exposure level is
shown by a lit indicator. (p.50) Use to start
and terminate user program setting. (p.56)
Alarm indicators
4
Drum replacement required
indicator (p.59)
Misfeed indicator (p.64)
TD cartridge replacement
required indicator (p.58)
SPF indicator (p.48)
5
(15 cpm model only)
SPF misfeed indicator (p.67)
6
(15 cpm model only)
Copy ratio selector key and
7
indicators
Use to sequentially select preset
reduction/enlargement copy ratios.
Selected copy ratio is shown by a lit
indicator. (p.52)
Copy ratio display (%) key (p.52)
8
Display
9
Displays the specified copy quantity,
zoom copy ratio, user program code,
and error code.
SCANNER key and indicator
10
(p.31, p.39)
6
Two-sided copies from
one-sided originals.
Turn on Long Edge or
Turn on Short Edge
can be selected.
ON LINE key and indicator
11
Lights up when the unit is used as a
printer and scanner. For description of
the ON LINE indicator, see
"INDICATORS ON THE OPERATION
PANEL" (p.31).
Power save indicator
12
Lights up when the unit is in a power
save mode. (p.55, p.56)
Paper feed location indicators
13
Light up to show the selected paper
feed station.
Zoom keys and indicator
14
Use to select any reduction or
enlargement copy ratio from 25% to
400% in 1% increments. (p.52)
Copy quantity keys
15
• Use to select the desired copy
quantity (1 to 99). (p.49)
• Use to make user program entries.
(p.56)
Clear key
16
• Press to clear the display, or press
during a copy run to terminate
copying. (p.49)
• Press and hold down during standby
to display the total number of copies
made to date. (p.57)
Start key and indicator
17
• Copying is possible when the
indicator is on.
• Press to start copying
• Use to set a user program. (p.56)