Random Playback - Denon DN-T645 Instrucciones De Operación

ENGLISH
(1) Playing folders or files
1. Load a disc containing MP3 files.
• Example
When the number of folders is " 120" and the
number of files is " 512"
2. [ To select a folder ]
q In the stop mode, press the FOLDER button !1
to turn on the " FOLDER" indicator.
w Turn the select knob !2 to select the folder you
want to listen to.
• The folder name scrolls on the display.
e When the CUE button r is pressed at this time,
files in the folder can be selected.
• Operate following the procedure under " To
select a file" .
[ To select a file ]
q In the stop mode, press the TITLE button !0 to
turn on the " FILE" indicator.
✽ This operation is only necessary when the
" FOLDER" indicator is lit.
w Turn the select knob !2 to select the file you
want to listen to.
• The file name scrolls on the display.
) button t.
3. Press the play/pause ( 1 3
• After the track number is displayed, the folder or
file name scrolls on the display and playback
starts.
• The stop mode is set automatically once the last
track on the disc is played.
✽ When the TIME button i is pressed during
playback, the " FOLDER" or " FILE" indicator
turns off and the track number of elapsed track
time are displayed.
✽ The display switches as follows each time the
TITLE button !0 is pressed during playback :
File name (The " FILE" indicator lights.)
Title name (The " TITLE" indicator lights.)
Artist name (The " ARTIST" indicator lights.)
Album name (The " ALBUM" indicator lights.)
Elapsed time of currently playing track
12
(2) rogrammed playback of folders
P
or files
Use this function to select certain tracks from the disc
and program them to play in a certain order.
A maximum of 99 files and folders can be programmed.
(Programs can included both files and folders.)
2 Programming
1. In the stop mode, press the PROGRAM/DIRECT
button $0 .
• The " PROG" indicator lights.
2. [ To select a folder ]
q Press the FOLDER button !1 to turn on the
" FOLDER" indicator.
w Press the number buttons #9 to select the folder
you want to program.
• Example : When folder " 5" is programmed in
the first place
[ To select a file ]
q Press the TITLE button !0 to turn on the " FILE"
indicator.
✽ This operation is only necessary when the
" FOLDER" indicator is lit.
w Press the number buttons #9 to select the file
you want to program.
• Example : When the 21st track is programmed
in the second place
) button t.
1 3
3. Press the play/pause (
• The tracks are played in the programmed order.
✽ When the TIME button i is pressed during
playback, the " FOLDER" or " FILE" indicator
turns off and the track number of elapsed track
time are displayed.
2 Editing the program
✽ To check the contents of the program, press the
CALL button #8 . The programmed tracks appear in
the programmed order on the display each time the
CALL button #8 is pressed.
✽ To clear part of a program
q Press the CALL button #8 .
w Use the search buttons ( ) o to select
6 , 7
the file or folder to be cleared. When selected,
the contents of that program are displayed.
e Press the 0/CLEAR button #9 twice to clear the
displayed file or folder.
✽ Adding to programs
q Press the CALL button #8 .
w Use the search buttons ( ) o to select
6 7
,
the file or folder to be added.
e Follow the procedure under " To select a folder "
or " To select a file" to select a file or folder and
add it to the program.
✽ To
clear the entire program, press
PROGRAM/DIRECT button $0 while in the stop
mode.
✽ To use the direct play function, first press the
PROGRAM/DIRECT button $0 while in the playback
mode to cancel the program mode.
NOTES :
• Programming is not possible in the play or pause
mode.
• Direct searching is not possible during
programmed playback.
2 Presetting Programs
• Programs can be stored in the preset memory.
When a disc for which a program is preset is
loaded, the programmed playback mode is set
automatically.
• Programs can be stored for up to three discs.
1. Follow the instructions under " Programming" to
input the program.
2. Follow the instructions under " (2) Presetting
Procedure" to set the preset mode. (See Page 18.)
3. Turn the select knob !2 to select " 02:Prg1" (or
" 03:Prg2" or " 04:Prg3" ).
4. Press the select knob !2 .
• The character display changes as follows :
[Before change] [After change]
⇒
Prg1 OFF Prg1 ON
⇒
Prg2 OFF Prg2 ON
⇒
Prg3 OFF Prg3 ON
) button u.
5. Press the stop ( 2
• The preset setting mode is canceled and the set
return to the normal mode.
• To play a preset disc :
Load a disc for which a program is preset.
) button t.
6. Press the play/pause ( 1 3

(3) Random playback

2 All-track random
Use this function to play all the tracks on the disc once
in random order.
• Set the play mode to the continuous play mode. $2
1. In the stop mode (The " FOLDER" indicator turns
off.), press the RANDOM button #7 .
• The " RAND" indicator lights.
) button t.
2. Press the play/pause ( 1 3
• Tracks are automatically played in random order.
✽ To cancel the all-track random mode, press the
RANDOM button #7 again.
2 1-folder random
Use this function to play all the tracks in a single folder
once in random order.
the
• Set the play mode to the single play mode. $2
1. In the stop mode, press the FOLDER button !1 .
• The " FOLDER" indicator lights.
2. Turn the select knob !2 to select the folder to be
played in random order.
• The folder name scrolls on the display.
3. Press the RANDOM button #7 once.
• The " RAND" and " FOLDER" indicator lights.
) button t.
4. Press the play/pause ( 1 3
• A track in the selected folder is selected
automatically and playback starts.
• The stop mode is set automatically once all the
tracks in the folder have been played.
✽ When the TIME button i is pressed during
playback, the track number of elapsed track time
are displayed. (The " FOLDER" indicator do not
turns off.)
✽ To cancel the 1-folder random mode, press the
RANDOM button #7 again.