Tabla De Contenido; Features; Part Names And Functions - Denon DN-T645 Instrucciones De Operación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

2 INTRODUCTION
Thank you very much for purchasing the DENON
component CD / Cassette combi-deck.
DENON proudly presents this advanced combi-deck to
audiophiles and music lovers as a further proof of
DENON's non-compromising pursuit of the ultimate in
sound quality. The high quality performance and easy
operation are certain to provide you with many hours
of outstanding listening pleasure.
- TABLE OF CONTENTS -
Features..............................................................5
x
Part names and functions ............................5 ~ 8
Connections....................................................8, 9
v
and loading a disc ...............................................9
Normal CD playback .........................................10
Advanced CD playback...............................10, 11
,
The compact disc .............................................13
.
Cassette tapes..................................................13
⁄0
Playback............................................................14
⁄1
Recording ...................................................14, 15
⁄2
Memory stop ....................................................15
⁄3
Power on playback ...........................................15
⁄4
⁄5
Copying from CD to tape .................................15
⁄6
Expanded function............................................16
⁄7
⁄8
(DN-T645 only)..................................................17
⁄9
Before switching off the power .......................17
¤0
Maintenance.....................................................17
¤1
Preset functions and operations ................18, 19
¤2
Troubleshooting ................................................20
¤3
Specifications ...................................................20
2 ACCESSORIES
Check that the following parts are included in
addition to the main unit:
q Operating instructions ......................................1
w Connection Cords ............................................3

FEATURES

1
CD
2 99-track programming and random play
2 ±12 % Variable pitch playback
2 CD-R/RW playback
2 Back cue function, single/continuous playback
function
2 CD TEXT
2 MP3 playback (DN-T645 only)
2 Instant start playback
DECK
2 Dolby B/C noise reduction system
2 Dolby HX-Pro headroom extension system
(DN-T645 only)
2 Auto tape selector
2 Speed control of approximately ±12 % for tape
deck
2 Music search system
2 Quick auto reverse
GENERAL
2 19-inch rack mountable
2 Serial control port (9P D-sub)
2 Copy from CD to tape or use independently
2 Headphones jack with volume control
2 Relay playback
2 Cascade playback
2 Power on playback
2 XLR input/output
2 TRS MIC jacks on front panel (DN-T645 only)
2 Parallel remote control (DN-T645 only)
Max. 10°
DN-T645/625
CAUTION :
• Whenever the power operation switch is in the
OFF state, the apparatus is still connected on AC
line voltage.
• Please be sure to unplug the cord when you
leave home for, say, a vacation.
• The DN-T645/625 will work normally when the
player unit is mounted with the front panel within
10 degrees of the vertical plane. If the unit is
tilted excessively, discs may not load or unload
properly.

PART NAMES AND FUNCTIONS

2
(1) Front panel
q
Power operation switch (POWER)
• The power turns on when the button is
switched from the off position (
£
) to the on
position (
¢
).
• The power turns off when the button is
switched from the on position (
¢
) to the off
position (
£
).
NOTE :
• When the power is turned on, the cassette
deck mechanism is sometimes initialized.
This is normal.
w
Disc holder open/close button
5
(
OPEN/CLOSE)
• Press to load or eject the disc. Each press will
open or close the disc holder #2 .
e
PITCH button
• When this button is pressed, the pitch function
is turned on, and the CD is played at the pitch
(speed) set with the CD pitch control button y.
• When the button is pressed again, the pitch
function is turned off and the CD is played at
the standard playing pitch.
r
CUE button
• When pressed during playback, the pickup
returns to the position at which playback last
started and the pause mode is set.
• When pressed during manual search, the
pause mode is set at that position.
• When pressed while the disc holder is open,
the disc holder closes and the pause mode is
set.
t
Play/Pause button (
1 3
)
• Each press of the play/pause button causes the
operation to change from play to pause or from
pause back to play.
y
CD pitch control button (-, +)
• Press these button to set the playing pitch
within a range of ±12 % to -12 %.
• The set playing pitch is shown on the display.
• When the PITCH button e is turned on,
playback is performed the set pitch.
u
2
Stop button (
)
• Press this button to stop playback.
i
TIME button
• The time display switches each time this
button is pressed.
• Normally "ELAPSED" appears on the time
display and the current elapsed time is
displayed.
• When this button is pressed once, "REMAIN"
appears on the time display and the remaining
time for the current track is displayed.
When pressed again, the remaining time to the
end of the disc is displayed.
ENGLISH
(Refer to page 3.)
o
6
7
Search button (
,
)
• These buttons are used to accurately change
the positions where playback will start.
!0
TITLE button
• When the button is pressed, the text
information (disc title, track title, disc artist or
track artist) is displayed.
• When the button is pressed while in the
standby mode with a disc containing an MP3
ID3-Tag loaded, the file name is displayed.
When pressed during playback, the display
switches as shown below. (DN-T645 only)
Elapsed time of currently playing track
File name of currently playing track
Title name
Artist name
Album name
!1
FOLDER button (DN-T645 only)
• When disc containing MP3 format files is
loaded, in the stop mode press this button then
the folder select mode is possible.
!2
Select knob (
8
,
9
)
• Turn the knob clockwise by one click to move
one track forward, counterclockwise by one
click to move one track backward.
• When the knob turned while pressing it in, one
click corresponds to 10 tracks.
• In the preset mode, use this knob to set and
enter preset settings.
!3
RELAY MODE switch
• For normal operation, set this to "OFF".
• The relay mode can be set to RELAY (relay
playback between CD and cassette deck),
CASCADE (continuous playback on multiple
units is possible).
!4
Microphone input level control
(MIC LEVEL) (DN-T645 only)
• Adjust the level of the Microphone inputs.
5

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Dn-t625

Tabla de contenido