AIR DIE GRINDER SET
PDSS 16 A1
Introduction
Congratulations on the purchase of your new
appliance . You have chosen a high-quality product .
The operating instructions are part of this product .
They contain important information about safety,
usage and disposal . Before using the product,
please familiarise yourself with all operating and
safety instructions . Use the product only as de-
scribed and for the range of applications specified .
Please also pass these operating instructions on to
any future owner .
Intended use
This appliance is suitable for fine grinding work
with sanding pens for shaped polishers, felt
polishers and lamellar grinding wheels .
The tool may only be operated with a compressed
air supply . The maximum permissible operating
pressure specified on the tool must not be ex-
ceeded .
This tool must not be operated with explosive,
flammable or health-damaging gases .
Do not use as a lever, crusher or striking tool .
Any other usage or modification of the tool is
deemed to be improper and carries a significant
risk of accidents . The manufacturer accepts no re-
sponsibility for damage(s) resulting from improper
usage . This tool is intended for domestic use only .
■
14
│
GB │ IE
Symbols on the compressed air tool:
WARNING!
Features
Compressed air appliance
Air inlet
Connector nipple (pre-assembled)
Trigger lock
Trigger
Spindle
Collet chuck nut
Collet chuck 1/4" (pre-assembled)
Collet chuck 1/8"
Teflon tape (not included)
Assembly tool (SW 19)
Assembly tool (SW 14)
5x grinding bits (6 mm)
5x grinding bits (3 mm)
Read the operating
instructions before use .
Always wear eye
protection when using
or maintaining the
compressed air appli-
ance .
Always wear a dust
mask in situations in
which dust is being
generated .
Always wear hearing
protection .
Oil daily
PDSS 16 A1