Astralpool OPTIMA Serie Manual Tecnico página 17

Once we enter in this menu we see:
This menu can be used for modifying some of the alarms just when they appeared al least 3 times. If the star is located
alarm activated the machine will not started again until being reset. To reset the machine it is necessary to press the key
+ until we reach the reset alarm position. Press OK and after that the machine starts working again. If we press the key
ESC we go back to the main menu.
CALIBRATION Menu:
Once we reach the Calibration Menu, if we press OK it will appear the following Submenu that it is related to the
machine Configuration
To go in it will be necessary the password. Contact the Technical Service to obtain it..
In this Submenu it would be possible to change next parameters

Defrost end: Ending defrost Temperature.

INI defrost: Initial defrost temperature

Probe Cal: Constant that it is used to calibrate the water temperature probe
To leave this screen press ESC.
DATE /TIME Menu:
Modifiable Menu. Date/Time settings.
17
ENGLISH