Astralpool OPTIMA Serie Manual Tecnico página 18

EQUIPMENT SETTINGS
SELECTION MENU OF MANUAL / AUTOMATIC MODE
You can access into this menu by pressing OK during 5 sec from any menu.
Automatic mode it needs timetable settings.
PROGRAMMING Menu:
To enter in this menu you have to press the keys ESC and OK and then it will appear on the screen next information.
Values are:
BDF: Shows the constant to modify

000, with this constant we modify the working hours.

014, with this constant we vary the temperature of consignee.

124, starting defrost temperature constant.

139, ending defrost temperature.

238, calibration probe constant
By entering in this menu we automatically go into the timetable setting constants.
Timetable settings:

Nº: 00, nº: 01 nº 02; nº 04
These are the parameters to set starts/stops according to the user's settings. It is also possible to set the day of the week
and the week of the month
In order to make all these modifications you must reach the field that we want to program and then press OK. Once
selected we can change values by pressing keys+ and – .
Entering in the day of the week field , D: LMMJVSD, once selected thanks to keys + / -, we press OK and the field will
light on discontinuously. This means we can choose the day of the week that we want to set. Press cancel to exit. The
same happens with the months. With this function we can do all the time set that will fix the working periods.
To exit from this menu press the ESC and we will come back to the main Menu.
18
ENGLISH