Technical Data - Truper SCI-18 Manual De Instrucciones

Technical Data

Code
Description
Cutting Band
Cutting Capacity
Work Table
Table Tilt
Voltage
Frequency
Current
Power
Band Speed
Conductors
Work Cycle
Insulation
WARNING
Avoid the risk of electric shock or severe injury. When the power cable gets damaged
it should only be replaced by the manufacturer or at a
The build quality of the electric insulation is altered if spills or liquid gets into the tool while in use.
Do not expose to rain, liquids and/or dampness.
WARNING Before gaining access to the terminals all power sources should be disconnected.
1/4" a 1-1/2" x 136"
120 V
24,8 A
1800 ft/min
12 AWG x 3C with 221 °F Insulation Temperature
120 minutes' work per 30 minutes' rest. Daily Maximum 6 hours.
Power cord grips used in this product: Type "Y".
Tool build quality: Basic Insulation
Thermal insulation on motor winding: Class B
SCI-18
16278
Band Saw
18"
21" x 19"
-10° to 45°
/ 220 V
60 Hz
/ 12,5 A
2 HP
3870 ft/min
Class I
Authorized Service Center.
3
ENGLISH