Setting The Zeroing Distance - Leica GEOVID HD-B Instrucciones

4. Repeatedly press the main / release button to
select the relevant ballistics curve, i.e.
– to or
US1 US12
– to EU12, or
EU1
if you want the range to be displayed with no
point of impact correction (AbC)
– OFF.
5. Save your setting by pressing the secondary /
menu button.
• The saved setting appears continuously for 4s as
confirmation and the display then changes to
and goes out if no more actions are performed.
If a ballistics curve is set, after each range
measurement the range is displayed for 2s and then
the calculated correction value for 6s.
42

SETTING THE ZEROING DISTANCE

Start with step 1 if you have not yet opened the menu
system and with step 3 if you have already set the
ballistics curve and Sld is still flashing in the display.
1. Press and hold (≥3s) the secondary / menu button
(8).
• appears.
US.EU
2. Briefly (<2s) press the secondary / menu button
twice.
SId
• The display changes to
3. Select the relevant zeroing distance by repeatedly
pressing the main / release button (7).
– [m],
100
– [m], or
200
– [m], or
GEE
– [y], or
100
– [y], or
200
– [y].
300
4. Save your setting by pressing the secondary /
menu button.
• The saved setting appears continuously for 4s as
confirmation and the display then changes to
and goes out.
and then to SId.
bALL
AbC