Maintenance / Cleaning; Spare Parts - Leica GEOVID HD-B Instrucciones

MAINTENANCE / CLEANING

Your Leica Geovid HD-B binoculars do not require any
special care. Coarse dirt particles, such as sand,
should be removed with a fine hair brush or blown
away. Marks such as fingerprints on the front lens and
eyepiece lenses can be cleaned with a damp cloth and
then wiped off with a soft, clean leather or dust-free
cloth.
Important:
Do not exert heavy pressure when wiping highly soiled
lens surfaces. Although the coating is highly abrasion
resistant, it can be damaged by sand or salt crystals.
The housing should only be cleaned with a moist
leather cloth. Using dry cloths brings a risk of static
charge. Alcohol and other chemical solutions must not
be used to clean the optical system or the housing.
All Leica Geovid HD-B binoculars have their "personal"
serial number in addition to the type designation. Note
this number in your documentation for security.
Attention:
The housing may not be opened.

SPARE PARTS

If you should require any spare parts for your Leica
Geovid HD-B binoculars, e.g. eyepiece cups or covers,
please contact our Customer Service department or
the Leica office in your country (see warranty card for
addresses).
49