Sun Microsystems Fire 880 Manual De Montaje página 31

8. Check that the server is level and centered on the tray.
Use a level and adjust the server position if necessary.
9. Tighten the eight M4 screws that secure the server to the tray assembly.
Restoring the Server
1. Install the CPU/Memory boards and fan trays that you removed before you
installed the server into the cabinet.
See the Sun Fire 880 Server Service Manual for instructions to install components.
2. If you removed the server's side doors, replace them.
Caution – Avoid keeping the server 's doors open for extended periods while the
!
system is operating. Server doors must be closed to prevent automatic thermal
shutdown.
3. Close both of the server's side doors securely.
4. Slide the tray assembly into the cabinet.
5. Install the power supplies that you removed before you installed the server into
the cabinet.
See the Sun Fire 880 Server Service Manual for installation instructions.
Installing the Server Into the Cabinet en-27