Bushnell 119519 Manual De Instrucciones página 13

next parameter, then press LEFT to go back again to the previous one. You
should see the parameter setting you just made.
Fig. 4: Selecting Parameter Settings
EXAMPLES-Changing the Settings of Some Common Parameters
Beginning on page 18, you will find tables listing all of the parameters
found in the SETUP Menu, along with their possible settings (or range of
settings), and a detailed description of what the parameter controls and
what the settings do. If you read the previous section detailing how to select
parameters and change their settings, you should be able to dive right in, find
the parameter(s) you want, and setup the camera to your preferences. But
maybe you'd rather walk through an example or two first:
To change any parameter's setting, always start with the power switch in the
SETUP position. After the LCD comes on, press the MENU key.
The first parameter you will when you first enter the SETUP Menu is "Mode".
To change it from its default setting of "Camera" (still photos) to "Video"
(shoot video clips), press the DOWN key to select the "Video" setting.
Press the OK key to "Execute" (Set) the new setting you've selected for this
parameter.
Press MENU
(4a)
Press DOWN
(4b)
Press OK
13