Bushnell 119519 Manual De Instrucciones página 24

MOUNTING AND POSITIONING THE
SURvEILLANCE CAM
Mounting
After you've set up the camera's parameters to your personal preferences at
home or in your vehicle, you're ready to take it outside and slide the power
switch to "ON". When setting up the Surveillance Cam for monitoring
humans or animals and other applications, you must be sure to mount it in
place correctly and securely. We recommend mounting the Surveillance
Cam on a sturdy pole, post or tree with a diameter of about 6 in. (15cm). To
get the optimal picture quality, the mounting support should be about 16-17
ft. (5 meters) away from the place to be monitored, with the camera placed
at a height of 5-6.5 ft. (1.5~2 m). Also, keep in mind that you will get the best
results at night when the subject is within the ideal flash range, no farther
than 25' (8m) and no closer than 10' (3m) from the camera.
There are two ways to mount the Surveillance Cam: using the provided
adjustable web belt, or via the wall mount bracket and tripod socket.
Using the adjustable web belt: Fig. 5 illustrates using the web belt on the
Surveillance Cam. Push one end of the belt through the two brackets on
the back of the Surveillance Cam. Thread one plastic buckle part onto
each end of the belt. Fasten the belt securely around the post or tree by
clicking the buckle ends together after tightening the belt so there is no
slack left.
Fig. 5: Attaching the Belt
24