Removing The Plastic Side Panels - Sun Microsystems Enterprise 250 Manual De Montaje

Removing the Plastic Side Panels

1. Remove the plastic outer panel that partially covers the top of the chassis.
a. Insert a flat-blade screwdriver under the plastic panel and carefully flex the
panel to disengage it from the chassis.
b. Slide the panel toward the back of the system.
c. Grasp the bottom edge of the panel in the center and lift it up.
Rotate the bottom edge away from the chassis to disengage the hooks.
d. Lift the panel off the system.
1-10 Sun Enterprise 250 Server Rackmounting Guide • February 1999