Removing The Chassis Foot Glides Or Floor Casters - Sun Microsystems Enterprise 250 Manual De Montaje

Removing the Chassis Foot Glides or Floor Casters

1. Remove all four foot glides from the underside of the chassis, if present.
Remove the Phillips screw at the center of each foot glide. Be sure to remove both
mounting brackets.
2. If your server has optional floor casters, remove the caster plate assembly.
Remove the eight Phillips screws that secure the floor casters assembly to the
underside of the chassis. See the instructions provided in the Sun Enterprise 250
Server Owner's Guide.
How to Rackmount the Sun Enterprise 250 Server 1-13