Attaching Inner Glides And The Stop Bracket - Sun Microsystems Enterprise 250 Manual De Montaje

Attaching Inner Glides and the Stop Bracket

1. Disconnect all external cables from the server rear panel, if present.
2. Carefully turn the chassis onto its right side (as viewed from the front), if you
haven't already done so.
Enlist the help of another person to accomplish this safely.
Do not lift the chassis using the plastic panels at the front of the chassis. Place the
system on a solid surface that spaces the unit about 2 inches (5 cm) off the floor; for
example, use a pair of wooden boards. Do not allow any of the weight to rest on the
plastic panels at the front of the chassis.
1-14 Sun Enterprise 250 Server Rackmounting Guide • February 1999