Installing The Server In The Rack Enclosure - Sun Microsystems Enterprise 250 Manual De Montaje

5. Use a level to ensure that the slide assemblies are level front-to-back and
left-to-right. After leveling, completely tighten the front and rear screws for
each slide bracket assembly.
Installing the Server in the Rack
Enclosure
This procedure requires two people.
Caution – The chassis is heavy. In the following procedures, two people are
!
required to insert the chassis.
1. Extend the stabilizer legs and lower the leveling pads to ensure that the cabinet
cannot move or tip forward when the system is extended.
Caution – If your rack enclosure does not have stabilizer legs, secure it sufficiently
to support the total weight of the system when it is fully extended.
How to Rackmount the Sun Enterprise 250 Server 1-25